Tuto WEBDEV 25

264 Part 6: Deploying a site 6.  The directories of the user account are automatically filled according to the specified data. 7. Continue with the wizard until you reach the "Virtual Web site" step. • If you choose to create a new virtual site, all you have to do is specify the DNS name that will lead to this site (the DNS must be configured accordingly). • If you choose to use an existing virtual site, its configuration will be replaced. 8. Go to the next step. 9.  This step specifies whether FTP access and deployment should be allowed for the user. In our case, this option is not necessary because we will perform an HTTP deployment. Go to the next step. 10.  The wizard is ended. Check all choices. You have the ability to uncheck some operations if you do not want the wizard to perform them on your behalf. 11. Validate the wizard. Your server is now ready to receive WEBDEV sites. We will use the user we created to test the deployment of a site by HTTP. The different deployment modes Now that our Web server was configured, we are ready to deploy our site. Several methods are available. The choice of a method mainly depends on the technical constraints (ability to use an FTP server or not, access to the server, ...). A dynamic WEBDEV site can be deployed according to one of these methods: • Remote deployment from the development computer (by HTTP or FTP). We are going to deploy our site according to this method by HTTP. Remark: the setup via FTP requires an FTP server. • Deployment in PC SOFT Cloud .